Superstructure; 9.000mm-13.600mm front straight line, inside 2440 mm outside 2550 mm width. Sides are 4 - 5 covers. The covers are connected from the outside and their height is 800mm-900mm. The base will be covered with a row of sheet metal and a row of wood. There are press-pressed" Z" sleepers placed at certain intervals on the base.

Chassis; Reinforced "I" section main frames are welded from 120/12 mm lower and upper flats and 5 mm core sheet with automatic submerged arc welding machine. These chassis are supported by connecting to each other with traverses against torsion.

Axle; 3 axles with 12 tons capacity are used. It has brake pads and heavy-duty type brake levers in accordance with TSE norms.

Suspension; Parabolic double-deck Z shears and shock absorbers.

Front Axle Lift; Controlled front axle lifting system inside the cabin.

Tires and Rims; 385/65 R 22,5 size 6 + 1 tubeless tire

Electrical Equipment; It complies with SAE standards and Tiiv general regulations. Electricity is taken from the vehicle with a 7-pin socket. There are traffic warning and lights on both sides. There are rear parking, stop, turn signal, license plate lights, trailer reflectors and orange warning lights on the sides.

Brake Equipment; According to EC Standards 71/320 / ewg brake system, Automatic brake ratchets, 2 service brake chambers with 4 help, 2S / 2M EBS against rollover (Balance Control System). Air leaks that may occur on the trailer are prevented with the Swedish patented Ruffels fitting system.

King Pin; 2 "It is manufactured from forged steel (42 Cr Mo 4) in accordance with SAE / DIN norms. Because of screw connections, it is possible to change it practically.

Paint; Chassis and superstructure are painted in paint oven with Washing + Sandblasting + 2 + 1 coat Acrylic Paint.

Color; It will be determined according to the customer's request.

Standard Accessories; Partial plastic fenders covering the rear axle group tires, 2 sheet metal tool boxes. Control Panel (Check-rust, air gauge, ramp handle). Plastic water tank, 1 spare wheel carrier with basket Aluminum bicycle crash point Chock and wedge place

Optional Features; European axle group and all kinds of equipment, Imported sheet metal (Domex), NPI section main chassis arms. Base completely covered with MDF or complete sheet metal, Aluminum rim, Double spare wheel carrier. Additional axle lift. Lift bumper. Fire extinguisher cabinet and tube, Optional Depending on the cover additions. Optional tire brand, Optional RAL color codes.