.

LOWBED SEMI TRAILER

.

Chassis; The Low-Bed chassis is 20 mm x 150 mm (ST 52.3 A quality) lower and upper flat plate, 10 mm ST 52.3 core plate welded with a submerged welding machine. 4 pieces with "I" section. Chassis supported by 160 NPI cross members that cross the chassis from below.

Axle; 2 axles with a capacity of 12-14-16 tons are used. There are brake pads and heavy-duty brake levers in accordance with TSE norms with air suspension, stacked scissors, tandem suspension.

Suspension; Parabolic double-deck Z spring, Masonry springs, tandem suspension

Feet Front: 24 tons Mechanical trailer legs, Back: Manual support legs,

Rear Ramp; Rear legs with air-hydraulic pistons made of 160 NPU,

Front Axle Lift; Controlled front axle lifting system inside the cabin

Tires and Rims; 8 + 1 tires are used in sizes 235/70 R 17.5, 245/70 R 17.5, 295/60 R 22.5,12 R 22.5 315/80 R 22.5.

Electrical Equipment; It complies with SAE standards and Tuv general regulations. Electricity is taken from the vehicle with a 7-pin socket. There are traffic warning and lights on both sides. There are rear parking, stop, turn signal, license plate lights, trailer reflectors and orange warning lights on the sides.

Brake System; According to EC Standards 71/320 / ewg brake system, Automatic brake ratchets, 2 service brake chambers with 4 help, 2S / 2M EBS against rollover (Balance Control System). Air leaks that may occur on the trailer are prevented with the Swedish patented Ruffels fitting system.

King Pin; 2 "It is manufactured from forged steel (42 Cr Mo 4) in accordance with SAE / DIN norms. Because of screw connections, it is possible to change it practically.

Paint; Chassis and superstructure are painted in paint oven with Washing + Sandblasting + 2 + 1 coat Acrylic Paint.

Color; It will be determined according to the customer's request.

Standard Accessories; Partial plastic fenders covering the rear axle group tires, 2 sheet metal tool boxes. Control Panel (Check-rust, air gauge, ramp handle), Plastic water tank, 1 spare wheel carrier with basket Aluminum bicycle crash point. Chock and wedge place

Optional Features; European axle group and all kinds of equipment, Imported sheet metal (Domex), NPI section main chassis arms, Base completely covered with MDF or complete sheet metal, Aluminum rim, Double spare wheel carrier, Additional axle lift. Lift bumper, Fire extinguisher cabinet and tube. Optional Depending on the cover additions, Optional tire brand, Optional RAL color codes.